Skip to content

Cart

Your cart is empty

Restoration kit · Tested at PSA

Bring your Pokémon cards back to life

Clean, revive the holo effect, and flatten your cards before PSA, PCA, or CGC, without damaging the surface.

See the complete kit – €59

Discover the range

✓ Shipped within 24-48 hours · ✓ Free shipping from €49 · ✓ 30-day returns

Ships in 24-48 hours

Prepared and shipped from Belgium.

Free shipping from €49

Delivery to a pickup point near you. €4.99 below €49.

30-day returns

Changed your mind? You have 30 days.

Tested at PSA

Alcohol-free formulas, non-abrasive microfibers.

The range

Our care for your cards

Spray, shine gel, microfibers, and flattening kits: alcohol-free products to prepare your cards for grading.

Dark Charizard holo Pokémon card before restoration: scratched, dull holo Dark Charizard holo Pokémon card after the Restore+ shine gel: holo effect revived BeforeAfter ‹ ›

Dark Charizard · scratched, dull holo revived with the shine gel

Before / after

Scratches, marks, tarnished holo: the difference is visible

✓  Removes micro-scratches and light surface scratches

✓  Removes fingerprints, grease, and dust, on both front and back

✓  Revives the mirror effect of dulled holo, reverse, and full art cards

✓  Prepares the surface before sending to PSA, CGC, PCA, or BGS

✕  Does not repair creases, damaged corners, deep scratches, or yellowed cardboard

See the €59 kit

Drag the slider to compare.

Instructions for use

A card restored in 3 steps

A simple method, taking just a few minutes per card, using only the contents of the kit.

1. Dusting: gently wipe the front and back with a microfiber cloth.

2. Cleaning: spray the cleaner onto the microfiber cloth (never directly onto the card), wipe the matte areas, then the corners and edges with a cotton swab.

3. Reviving the holo: apply a small amount of gel onto a foam applicator without pressing down on the shiny area, then buff with a clean microfiber cloth.

The most comprehensive

Pokémon card restoration kit

Everything you need to clean a card and revive the holo effect, all in one pack. The kit ships free; the spray alone costs you €39.89 with shipping. For €19.11 more, you also get the gel, 2 microfibre cloths, 5 applicators and 10 cotton swabs.

✓  Alcohol-free cleaning spray

✓  Shine gel for holo surfaces

✓  2 ultra-soft microfiber cloths

✓  5 foam applicators

✓  10 precision cotton swabs

Spray + gel purchased separately: €69.80

Complete kit: €59.00

The Blog

Our collector's guides

Pokémon card grading: how to get your cards graded

PSA, PCA, CGC: choosing, preparing, and submitting your cards, step by step.

Read the guide →

Cleaning a card before grading

Best practices for arriving at PSA, PCA, or CGC with a clean surface.

Read the guide →

Curled Pokémon card: why it happens, and what to do?

Humidity, storage, pressure: understanding warping and correcting it safely.

Read the guide →

All guides

Frequently Asked Questions

Is it allowed to clean a Pokémon card before grading?

Yes, light surface cleaning (dust, fingerprints, tiny debris) is common before grading. Our PSA test: more than 100 cards cleaned with the spray and more than 100 cards treated with the gel were sent to PSA, and none was rejected. The grading company always has the final say on the grade.

Can these products damage the card?

Used as directed, no: alcohol-free spray applied to the microfiber and never directly on the card, non-abrasive microfibers, very small amount of gel.

Can you remove a micro-scratch from a Pokémon card?

Yes, if it is light and superficial. The gloss gel, suitable for holo surfaces, diminishes its visual appearance. A deep scratch, however, will not disappear.

How do you flatten a warped card?

With light, steady, and heat-free pressure. The flattening kit is designed for this: allow 12 to 24 hours, sometimes several cycles for a very curled card.

Is this compatible with other TCGs?

Yes: One Piece, Lorcana, Magic, Yu-Gi-Oh, Weiss Schwarz, Dragon Ball, etc.